View C114G13922G5C1_1058342.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

CERAMIC MOLDED AXIAL & RADIAL
PERFORMANCE CHARACTERISTICS GENERAL
Working Voltage: C0G - 50, 100 & 200 Volts X7R - 50, 100 & 200 Volts Temperature Characteristics: C0G - 0 30 PPM/C from -55C to +125C X7R - 15% from -55C to +125C Capacitance Tolerance: C0G - 0.5 pF, 1%, 2%, 5%, 10%, 20% (0.5 pF is tightest available tolerance) X7R - 10%, 20%, -0 +100%, -20% +80% Construction: Monolithic block of ceramic dielectric with interdigitated internal electrodes, encapsulated in a molded case, and having axial or radial leads. Meets flame test requirements of UL Standard 94V-0. Terminal Strength: EIA-198 Method 303 Condition A (2.2 kg) Insulation Resistance: C0G - 10K megohms or 100 megohm - F, whichever is less X7R - 10K megohms or 100 megohm - F, whichever is less Dielectric Withstanding Voltage: 250% of rated voltage for 5 seconds with current limited to 50 mA.
ENVIRONMENTAL
Moisture Resistance: MIL-STD-202, Method 106, or EIA-198, Method 204, Condition A, except 20 cycles. Insulation Resistance: C0G - 10K megohms or 100 megohm - F, whichever is less X7R - 10K megohms or 100 megohm - F, whichever is less Dielectric Withstanding Voltage: 250% of rated voltage for 5 seconds with current limited to 50 mA. Immersion Cycling: MIL-STD-202, Method 104, Condition B. Post-Test limits at 25C are: Insulation Resistance: C0G - 10K megohms or 100 megohm - F, whichever is less X7R - 10K megohms or 100 megohm - F, whichever is less Solderability: MIL-STD-202, Method 208, Sn62 solder, 245C for 5 1/2 seconds. Resistance to Soldering Heat: MIL-STD-202, Method 210, Condition B (260C, 10 secs). Depth of immersion -- to a minimum of .050" from the capacitor body. Lead Material: Axial: Solder-coated copper clad steel Radial: Solder-coated copper
ELECTRICAL
Capacitance: Within specified tolerance when measured with 1 volt rms at 1 kHz (1000 pF or less at 1 MHz for C0G). Dissipation Factor: 25C at 1 kHz (1000 pF or less at 1 MHz for C0G). C0G - .15% maximum X7R - 2.5% maximum Insulation Resistance: After 2 minutes electrification at 25C and rated voltage C0G - 100K megohms or 1000 megohm - F, whichever is less. X7R - 100K megohms or 1000 megohm - F, whichever is less. Dielectric Withstanding Voltage: 250% of rated voltage for 5 seconds with current limited to 50 mA at 25C. Life Test: 2000 hours at 200% of rated voltage at 125C. Post-Test limits at 25C are: Capacitance Change: C0G - less than 3% or 0.25 pF, whichever is higher X7R - 20% of initial value Dissipation Factor: C0G - .25% maximum X7R - 3.0% maximum
20
(c) KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC MOLDED/AXIAL & RADIAL -- MIL-PRF-20
CAPACITOR OUTLINE DRAWINGS (AXIAL LEADS) 1.50 Min. (38.10) L 1.50 Min. (38.10) C D
DIMENSIONS -- INCHES & (MILLIMETERS)
CASE SIZE C114 C124 C192 C202 C222 MILITARY EQUIVALENT STYLES CC75, CCR75 CC76, CCR76 CC77, CCR77 CC78, CCR78 CC79, CCR79 L .160 .010 (4.06 .25) .250 .010 (6.35 .25) .390 .010 (9.91 .25) .500 .020 (12.70 .51) .690 .030 (17.53 .76) D .090 .010 (2.29 .25) .090 .010 (2.29 .25) .140 .010 (3.56 .25) .250 .015 (6.35 .38) .350 .020 (8.89 .51) C .020, +.000, -.003 (.51, +.00, -.08) .020, +.000, -.003 (.51, +.00, -.08) .025, +.002, -.002 (.64, +.05, -.05) .025, +.002, -.002 (.64, +.05, -.05) .025, +.002, -.002 (.64, +.05, -.05)
CAPACITOR OUTLINE DRAWINGS (RADIAL LEADS)
C052 (CC05, CCR05) L W C056 (CCR05) L W C062 (CC06, CCR06), C512 (CC07, CCR07), C522 (CC08, CCR08) L W C066 (CCR06) L
.026 MIN.
W
H
H .026 MIN.
Lead Dia. .025 (+.004 -.002)
H
H
1.25 MIN.
Lead Dia. .025 (+.004 -.002)
.045 MAX.
1.25 MIN.
1.25 MIN.
Lead Dia. .025 (+.004 -.002)
1.25 MIN.
Lead Dia. .025 (+.004 -.002) S
S
S
S Center Line of leads within .030" of Center Line of case.
* Leads are .625 minimum when tape and reel packaged
DIMENSIONS -- INCHES & (MILLIMETERS)
CASE SIZE C052/ C056 C062/ C066 C512 C522 MILITARY EQUIVALENT STYLES CC05, CCR05 CC06, CCR06 CC07, CCR07 CC08, CCR08 H HEIGHT .190 .010 (4.83 .25) .290 .010 (7.37 .25) .480 .020 (12.19 .51) .480 .020 (12.19 .51) L LENGTH .190 .010 (4.83 .25) .290 .010 (7.37 .25) .480 .020 (12.19 .51) .480 .020 (12.19 .51) W WIDTH .090 .010 (2.29 .25) .090 .010 (2.29 .25) .140 .010 (3.56 .25)* .240 .010 (6.10 .25) S LEAD SPACING .200 .015 (5.08 .38) .200 .015 (5.08 .38) .400 .020 (10.16 .51) .400 .020 (10.16 .51)
* 0.200 (5.08) maximum for 100,000 pF only.
For packaging information, see pages 39, 40, and 41.
(c) KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 27
MIL-PRF-20
CERAMIC MOLDED/AXIAL & RADIAL -- MIL-PRF-20
ORDERING INFORMATION C 052 G 102 J 1 G 5 C R**
CERAMIC *CASE SIZE
(See Table Below)
FAILURE RATE
A M P R S -- Not Applicable (Std.) -- 1.0% -- 0.1% -- 0.01% -- 0.001%
SPECIFICATION
Military G -- MIL-PRF-20
CAPACITANCE
In picofarad code: First two digits are significant figures and third is number of zeroes following (except 9 indicates division by 10). Examples: 0.1 F = 100,000 pF = 104 and 9.1 pF = 919. See tables for Standard Values.
LEAD MATERIAL
C -- Standard
INTERNAL CONSTRUCTION
5 -- Standard
CAPACITANCE TOLERANCE
Standard K -- 10% J -- 5% Others G -- 2% C -- 0.25 pF F -- 1% D -- 0.5 pF B -- 0.1 pF
WORKING VOLTAGE
1 -- 100 2 -- 200 5 -- 50
TEMPERATURE CHARACTERISTIC
Capacitance Change With Temp. Measured Measured Without With Bias KEMET Military EIA Temp. DC Bias (Rated Designator Equivalent Equivalent Range, C Voltage Voltage) G (Ultra Stable) *CH -- *CJ -- *CK -- *CX -- *CG (See below) C0G (NPO) -55 to +125 30 ppm/C* 30 ppm/C*
Standard tolerances for each Series are shown in the repetitive parts lists.
*CASE SIZES RADIAL AXIAL C052 C114 C056 C124 C062 C192 C066 C202 C512 C222 C522
60 ppm/C 8.2 pF-18.0 pF. 120 ppm/C 4.3 pF-7.5 pF. 250 ppm/C 2.2 pF-3.9 pF not measurable 0.1 pF-2.0 pF.
**Part Number Example: C052G102J1G5CR (14 digits - no spaces)
CAPACITOR MARKING
CC(R) 75, 76
JCK 2R2 CM5 11AK "J" Brand (CCR only), Temperature Characteristic Capacitance Capacitance Tolerance, Failure Rate (CCR only), Year Code Lot Code, Trademark (K) FRONT CCR0 5CH1 00FR REAR 0504 AJ3 1433 FRONT CCR06 CG102 JS REAR 0504A J100V 31433
CC(R) 05
Military Designation (Type, Temperature Characteristic, Capacitance, Tolerance, Failure Rate) ** For the standoff style, a "V" is added after the failure rate, or last character. Date Code Lot Code, "J" Brand (CCR only), FSCM (Federal Source Code)
CC(R) 77
CCR77C G102JM J31433 0504A Military Designation (Type, Temperature Characteristic, Capacitance, Tolerance, Failure Rate) "J" Brand (CCR only), FSCM (Federal Source Code) Date/Lot Code
CC(R) 06
Military Designation (Type, Temperature Characteristic, Capacitance, Tolerance, Failure Rate) ** For the standoff style, a "V" is added after the failure rate, or last character. Date/LotCode "J" Brand (CCR only), Voltage FSCM (Federal Source Code)
CC(R) 78
CCR78CG 103FR JAN K 31433 100V 0504A Military Designation (Type, Temperature Characteristic, Capacitance, Tolerance, Failure Rate) "JAN" Brand (CCR only), Trademark (K) FSCM (Federal Source Code) Voltage Date/Lot Code
CC(R) 07
CCR07CG 472KM JAN KEMET 31433 200V 0504A Military Designation (Type, Temperature Characteristic, Capacitance, Tolerance, Failure Rate) "JAN" Brand, Trademark FSCM (Federal Source Code) Voltage, Date/Lot Code
CC(R) 79
CCR79CG 103KM JAN K 31433 200V 0504A Military Designation (Type, Temperature Characteristic, Capacitance, Tolerance, Failure Rate) "JAN" Brand (CCR only), Trademark FSCM (Federal Source Code) Voltage Date/Lot Code
CC(R) 08
CCR08CG 472KM JAN KEMET 31433 200V 0509A Military Designation (Type, Temperature Characteristic, Capacitance, Tolerance, Failure Rate) "JAN" Brand, Trademark FSCM (Federal Source Code) Voltage, Date/Lot Code
28
(c) KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC MOLDED/AXIAL -- MIL-PRF-20
ULTRA-STABLE TEMPERATURE CHARACTERISTIC -- CG (EIA-C0G) RATINGS & PART NUMBER REFERENCE
CAP. pF KEMET PART NUMBER MILITARY STYLE CC MILITARY STYLE CCR CAP. pF KEMET PART NUMBER MILITARY STYLE CC MILITARY STYLE CCR
1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10.0 11.0 12.0 13.0 15.0 16.0 18.0 20.0 22.0 24.0 27.0 30.0 33.0 36.0 39.0 43.0 47.0 51.0 56.0 62.0 68.0 75.0
200 VOLT -- C114 (CC(R)75 PER MIL-PRF-20/27) C114G109(2)2G5C(1) CC75CX1R0(2) CCR75CX1R0(2)(1) C114G119(2)2G5C(1) CC75CX1R1(2) CCR75CX1R1(2)(1) C114G129(2)2G5C(1) CC75CX1R2(2) CCR75CX1R2(2)(1) C114G139(2)2G5C(1) CC75CX1R3(2) CCR75CX1R3(2)(1) C114G159(2)2G5C(1) CC75CX1R5(2) CCR75CX1R5(2)(1) C114G169(2)2G5C(1) CC75CX1R6(2) CCR75CX1R6(2)(1) C114G189(2)2G5C(1) CC75CX1R8(2) CCR75CX1R8(2)(1) C114G209(2)2G5C(1) CC75CX2R0(2) CCR75CX2R0(2)(1) C114G229(2)2G5C(1) CC75CK2R2(2) CCR75CK2R2(2)(1) C114G249(2)2G5C(1) CC75CK2R4(2) CCR75CK2R4(2)(1) C114G279(3)2G5C(1) CC75CK2R7(3) CCR75CK2R7(3)(1) C114G309(3)2G5C(1) CC75CK3R0(3) CCR75CK3R0(3)(1) C114G339(3)2G5C(1) CC75CK3R3(3) CCR75CK3R3(3)(1) C114G369(3)2G5C(1) CC75CK3R6(3) CCR75CK3R6(3)(1) C114G399(3)2G5C(1) CC75CK3R9(3) CCR75CK3R9(3)(1) C114G439(3)2G5C(1) CC75CJ4R3(3) CCR75CJ4R3(3)(1) C114G479(3)2G5C(1) CC75CJ4R7(3) CCR75CJ4R7(3)(1) C114G519(3)2G5C(1) CC75CJ5R1(3) CCR75CJ5R1(3)(1) C114G569(3)2G5C(1) CC75CJ5R6(3) CCR75CJ5R6(3)(1) C114G629(3)2G5C(1) CC75CJ6R2(3) CCR75CJ6R2(3)(1) C114G689(3)2G5C(1) CC75CJ6R8(3) CCR75CJ6R8(3)(1) C114G759(3)2G5C(1) CC75CJ7R5(3) CCR75CJ7R5(3)(1) C114G829(3)2G5C(1) CC75CH8R2(3) CCR75CH8R2(3)(1) C114G919(3)2G5C(1) CC75CH9R1(3) CCR75CH9R1(3)(1) C114G100(4)2G5C(1) CC75CH100(4) CCR75CH100(4)(1) C114G110(4)2G5C(1) CC75CH110(4) CCR75CH110(4)(1) C114G120(4)2G5C(1) CC75CH120(4) CCR75CH120(4)(1) C114G130(4)2G5C(1) CC75CH130(4) CCR75CH130(4)(1) C114G150(4)2G5C(1) CC75CH150(4) CCR75CH150(4)(1) C114G160(4)2G5C(1) CC75CH160(4) CCR75CH160(4)(1) C114G180(4)2G5C(1) CC75CH180(4) CCR75CH180(4)(1) C114G200(4)2G5C(1) CC75CG200(4) CCR75CG200(4)(1) C114G220(4)2G5C(1) CC75CG220(4) CCR75CG220(4)(1) C114G240(4)2G5C(1) CC75CG240(4) CCR75CG240(4)(1) C114G270(4)2G5C(1) CC75CG270(4) CCR75CG270(4)(1) C114G300(4)2G5C(1) CC75CG300(4) CCR75CG300(4)(1) C114G330(4)2G5C(1) CC75CG330(4) CCR75CG330(4)(1) C114G360(4)2G5C(1) CC75CG360(4) CCR75CG360(4)(1) C114G390(4)2G5C(1) CC75CG390(4) CCR75CG390(4)(1) C114G430(4)2G5C(1) CC75CG430(4) CCR75CG430(4)(1) C114G470(4)2G5C(1) CC75CG470(4) CCR75CG470(4)(1) C114G510(4)2G5C(1) CC75CG510(4) CCR75CG510(4)(1) C114G560(4)2G5C(1) CC75CG560(4) CCR75CG560(4)(1) C114G620(4)2G5C(1) CC75CG620(4) CCR75CG620(4)(1) C114G680(4)2G5C(1) CC75CG680(4) CCR75CG680(4)(1) C114G750(4)2G5C(1) CC75CG750(4) CCR75CG750(4)(1)
To complete Part Number, insert the following letters: (1) Available Failure Rates: A (CC styles only); M, P, R & S (CCR styles only). (2) Available Capacitance Tolerances: B, C. (3) Available Capacitance Tolerances: B, C, D. (4) Available Capacitance Tolerances: F, G, J.
100 VOLT -- C114 (CC(R)75 PER MIL-PRF-20/27) C114G820(4)1G5C(1) CC75CG820(4) CCR75CG820(4)(1) C114G910(4)1G5C(1) CC75CG910(4) CCR75CG910(4)(1) C114G101(4)1G5C(1) CC75CG101(4) CCR75CG101(4)(1) C114G111(4)1G5C(1) CC75CG111(4) CCR75CG111(4)(1) C114G121(4)1G5C(1) CC75CG121(4) CCR75CG121(4)(1) C114G131(4)1G5C(1) CC75CG131(4) CCR75CG131(4)(1) C114G151(4)1G5C(1) CC75CG151(4) CCR75CG151(4)(1) C114G161(4)1G5C(1) CC75CG161(4) CCR75CG161(4)(1) C114G181(4)1G5C(1) CC75CG181(4) CCR75CG181(4)(1) C114G201(4)1G5C(1) CC75CG201(4) CCR75CG201(4)(1) C114G221(4)1G5C(1) CC75CG221(4) CCR75CG221(4)(1) C114G241(4)1G5C(1) CC75CG241(4) CCR75CG241(4)(1) 50 VOLT -- C114 (CC(R)75 PER MIL-PRF-20/27) 270.0 C114G271(4)5G5C(1) CC75CG271(4) CCR75CG271(4)(1) 300.0 C114G301(4)5G5C(1) CC75CG301(4) CCR75CG301(4)(1) 330.0 C114G331(4)5G5C(1) CC75CG331(4) CCR75CG331(4)(1) 360.0 C114G361(4)5G5C(1) CC75CG361(4) CCR75CG361(4)(1) 390.0 C114G391(4)5G5C(1) CC75CG391(4) CCR75CG391(4)(1) 430.0 C114G431(4)5G5C(1) CC75CG431(4) CCR75CG431(4)(1) 470.0 C114G471(4)5G5C(1) CC75CG471(4) CCR75CG471(4)(1) 510.0 C114G511(4)5G5C(1) CC75CG511(4) CCR75CG511(4)(1) 560.0 C114G561(4)5G5C(1) CC75CG561(4) CCR75CG561(4)(1) 620.0 C114G621(4)5G5C(1) CC75CG621(4) CCR75CG621(4)(1) 680.0 C114G681(4)5G5C(1) CC75CG681(4) CCR75CG681(4)(1) 200 VOLT -- C124 (CC(R)76 PER MIL-PRF-20/28) 82.0 C124G820(4)2G5C(1) CC76CG820(4) CCR76CG820(4)(1) 91.0 C124G910(4)2G5C(1) CC76CG910(4) CCR76CG910(4)(1) 100.0 C124G101(4)2G5C(1) CC76CG101(4) CCR76CG101(4)(1) 110.0 C124G111(4)2G5C(1) CC76CG111(4) CCR76CG111(4)(1) 120.0 C124G121(4)2G5C(1) CC76CG121(4) CCR76CG121(4)(1) 130.0 C124G131(4)2G5C(1) CC76CG131(4) CCR76CG131(4)(1) 100 VOLT -- C124 (CC(R)76 PER MIL-PRF-20/28) 270.0 C124G271(4)1G5C(1) CC76CG271(4) CCR76CG271(4)(1) 300.0 C124G301(4)1G5C(1) CC76CG301(4) CCR76CG301(4)(1) 330.0 C124G331(4)1G5C(1) CC76CG331(4) CCR76CG331(4)(1) 360.0 C124G361(4)1G5C(1) CC76CG361(4) CCR76CG361(4)(1) 390.0 C124G391(4)1G5C(1) CC76CG391(4) CCR76CG391(4)(1) 430.0 C124G431(4)1G5C(1) CC76CG431(4) CCR76CG431(4)(1) 470.0 C124G471(4)1G5C(1) CC76CG471(4) CCR76CG471(4)(1) 510.0 C124G511(4)1G5C(1) CC76CG511(4) CCR76CG511(4)(1) 560.0 C124G561(4)1G5C(1) CC76CG561(4) CCR76CG561(4)(1) 620.0 C124G621(4)1G5C(1) CC76CG621(4) CCR76CG621(4)(1) 680.0 C124G681(4)1G5C(1) CC76CG681(4) CCR76CG681(4)(1) 50 VOLT -- C124 (CC(R)76 PER MIL-PRF-20/28) 750.0 C124G751(4)5G5C(1) CC76CG751(4) CCR76CG751(4)(1) 820.0 C124G821(4)5G5C(1) CC76CG821(4) CCR76CG821(4)(1) 910.0 C124G911(4)5G5C(1) CC76CG911(4) CCR76CG911(4)(1) 1,000.0 C124G102(4)5G5C(1) CC76CG102(4) CCR76CG102(4)(1) 200 VOLT -- C192 (CC(R)77 PER MIL-PRF-20/29) 150.0 C192G151(4)2G5C(1) CC77CG151(4) CCR77CG151(4)(1) 160.0 C192G161(4)2G5C(1) CC77CG161(4) CCR77CG161(4)(1) 180.0 C192G181(4)2G5C(1) CC77CG181(4) CCR77CG181(4)(1) 200.0 C192G201(4)2G5C(1) CC77CG201(4) CCR77CG201(4)(1) 220.0 C192G221(4)2G5C(1) CC77CG221(4) CCR77CG221(4)(1) 240.0 C192G241(4)2G5C(1) CC77CG241(4) CCR77CG241(4)(1) 270.0 C192G271(4)2G5C(1) CC77CG271(4) CCR77CG271(4)(1) 300.0 C192G301(4)2G5C(1) CC77CG301(4) CCR77CG301(4)(1) 330.0 C192G331(4)2G5C(1) CC77CG331(4) CCR77CG331(4)(1) 360.0 C192G361(4)2G5C(1) CC77CG361(4) CCR77CG361(4)(1) 390.0 C192G391(4)2G5C(1) CC77CG391(4) CCR77CG391(4)(1) 430.0 C192G431(4)2G5C(1) CC77CG431(4) CCR77CG431(4)(1) 470.0 C192G471(4)2G5C(1) CC77CG471(4) CCR77CG471(4)(1) 510.0 C192G511(4)2G5C(1) CC77CG511(4) CCR77CG511(4)(1) 560.0 C192G561(4)2G5C(1) CC77CG561(4) CCR77CG561(4)(1) 620.0 C192G621(4)2G5C(1) CC77CG621(4) CCR77CG621(4)(1) 680.0 C192G681(4)2G5C(1) CC77CG681(4) CCR77CG681(4)(1) 82.0 91.0 100.0 110.0 120.0 130.0 150.0 160.0 180.0 200.0 220.0 240.0
(c) KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
29
MIL-PRF-20
CERAMIC MOLDED/AXIAL -- MIL-PRF-20
ULTRA-STABLE TEMPERATURE CHARACTERISTIC -- CG (EIA-C0G) RATINGS & PART NUMBER REFERENCE
CAP. pF KEMET PART NUMBER MILITARY STYLE CC MILITARY STYLE CCR CAP. pF KEMET PART NUMBER MILITARY STYLE CC MILITARY STYLE CCR
750.0 820.0 910.0 1,000.0 1,100.0 1,200.0 1,300.0 1,500.0 1,600.0 1,800.0 2,000.0 2,200.0 2,400.0 2,700.0 3,000.0 3,300.0 3,600.0 3,900.0 4,300.0 4,700.0 5,100.0 5,600.0 820.0 1,000.0 1,200.0 1,500.0 1,800.0 2,200.0 2,700.0 3,300.0
100 VOLT -- C192 (CC(R)77 PER MIL-PRF-20/29) C192G751(4)1G5C(1) CC77CG751(4) CCR77CG751(4)(1) C192G821(4)1G5C(1) CC77CG821(4) CCR77CG821(4)(1) C192G911(4)1G5C(1) CC77CG911(4) CCR77CG911(4)(1) C192G102(4)1G5C(1) CC77CG102(4) CCR77CG102(4)(1) C192G112(4)1G5C(1) CC77CG112(4) CCR77CG112(4)(1) C192G122(4)1G5C(1) CC77CG122(4) CCR77CG122(4)(1) C192G132(4)1G5C(1) CC77CG132(4) CCR77CG132(4)(1) C192G152(4)1G5C(1) CC77CG152(4) CCR77CG152(4)(1) C192G162(4)1G5C(1) CC77CG162(4) CCR77CG162(4)(1) C192G182(4)1G5C(1) CC77CG182(4) CCR77CG182(4)(1) C192G202(4)1G5C(1) CC77CG202(4) CCR77CG202(4)(1) C192G222(4)1G5C(1) CC77CG222(4) CCR77CG222(4)(1) 50 VOLT -- C192 (CC(R)77 PER MIL-PRF-20/29) C192G242(4)5G5C(1) CC77CG242(4) CCR77CG242(4)(1) C192G272(4)5G5C(1) CC77CG272(4) CCR77CG272(4)(1) C192G302(4)5G5C(1) CC77CG302(4) CCR77CG302(4)(1) C192G332(4)5G5C(1) CC77CG332(4) CCR77CG332(4)(1) C192G362(4)5G5C(1) CC77CG362(4) CCR77CG362(4)(1) C192G392(4)5G5C(1) CC77CG392(4) CCR77CG392(4)(1) C192G432(4)5G5C(1) CC77CG432(4) CCR77CG432(4)(1) C192G472(4)5G5C(1) CC77CG472(4) CCR77CG472(4)(1) C192G512(5)5G5C(1) CC77CG512(5) CCR77CG512(5)(1) C192G562(5)5G5C(1) CC77CG562(5) CCR77CG562(5)(1) 200 VOLT -- C202 (CC(R)78 PER MIL-PRF-20/30) C202G821(5)2G5C(1) CC78CG821(5) CCR78CG821(5)(1) C202G102(5)2G5C(1) CC78CG102(5) CCR78CG102(5)(1) C202G122(5)2G5C(1) CC78CG122(5) CCR78CG122(5)(1) C202G152(5)2G5C(1) CC78CG152(5) CCR78CG152(5)(1) C202G182(5)2G5C(1) CC78CG182(5) CCR78CG182(5)(1) C202G222(5)2G5C(1) CC78CG222(5) CCR78CG222(5)(1) C202G272(5)2G5C(1) CC78CG272(5) CCR78CG272(5)(1) C202G332(5)2G5C(1) CC78CG332(5) CCR78CG332(5)(1)
100 VOLT -- C202 (CC(R)78 PER MIL-PRF-20/30) 3,900.0 C202G392(5)1G5C(1) CC78CG392(5) CCR78CG392(5)(1) 4,700.0 C202G472(5)1G5C(1) CC78CG472(5) CCR78CG472(5)(1) 5,600.0 C202G562(5)1G5C(1) CC78CG562(5) CCR78CG562(5)(1) 6,800.0 C202G682(5)1G5C(1) CC78CG682(5) CCR78CG682(5)(1) 8,200.0 C202G822(5)1G5C(1) CC78CG822(5) CCR78CG822(5)(1) 10,000.0 C202G103(5)1G5C(1) CC78CG103(5) CCR78CG103(5)(1) 12,000.0 C202G123(5)1G5C(1) CC78CG123(5) CCR78CG123(5)(1) 50 VOLT -- C202 (CC(R)78 PER MIL-PRF-20/30) 15,000.0 C202G153(5)5G5C(1) CC78CG153(5) CCR78CG153(5)(1) 18,000.0 C202G183(5)5G5C(1) CC78CG183(5) CCR78CG183(5)(1) 22,000.0 C202G223(5)5G5C(1) CC78CG223(5) CCR78CG223(5)(1) 27,000.0 C202G273(5)5G5C(1) CC78CG273(5) CCR78CG273(5)(1) 200 VOLT -- C222 (CC(R)79 PER MIL-PRF-20/31) 3,900.0 C222G392(5)2G5C(1) CC79CG392(5) CCR79CG392(5)(1) 4,700.0 C222G472(5)2G5C(1) CC79CG472(5) CCR79CG472(5)(1) 5,600.0 C222G562(5)2G5C(1) CC79CG562(5) CCR79CG562(5)(1) 6,800.0 C222G682(5)2G5C(1) CC79CG682(5) CCR79CG682(5)(1) 8,200.0 C222G822(5)2G5C(1) CC79CG822(5) CCR79CG822(5)(1) 10,000.0 C222G103(5)2G5C(1) CC79CG103(5) CCR79CG103(5)(1) 100 VOLT -- C222 (CC(R)79 PER MIL-PRF-20/31) 15,000.0 C222G153(5)1G5C(1) CC79CG153(5) CCR79CG153(5)(1) 18,000.0 C222G183(5)1G5C(1) CC79CG183(5) CCR79CG183(5)(1) 22,000.0 C222G223(5)1G5C(1) CC79CG223(5) CCR79CG223(5)(1) 27,000.0 C222G273(5)1G5C(1) CC79CG273(5) CCR79CG273(5)(1) 33,000.0 C222G333(5)1G5C(1) CC79CG333(5) CCR79CG333(5)(1) 39,000.0 C222G393(5)1G5C(1) CC79CG393(5) CCR79CG393(5)(1) 50 VOLT -- C222 (CC(R)79 PER MIL-PRF-20/31) 47,000.0 C222G473(5)5G5C(1) CC79CG473(5) CCR79CG473(5)(1) 56,000.0 C222G563(5)5G5C(1) CC79CG563(5) CCR79CG563(5)(1) 68,000.0 C222G683(5)5G5C(1) CC79CG683(5) CCR79CG683(5)(1) 82,000.0 C222G823(5)5G5C(1) CC79CG823(5) CCR79CG823(5)(1)
To complete Part Number, insert the following letters: (1) Available Failure Rates: A (CC styles only); M, P, R & S (CCR styles only). (2) Available Capacitance Tolerances: B, C. (3) Available Capacitance Tolerances: B, C, D. (4) Available Capacitance Tolerances: F, G, J. (5) Available Capacitance Tolerances: F, G, J, K.
30
(c) KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC MOLDED/RADIAL -- MIL-PRF-20
ULTRA-STABLE TEMPERATURE CHARACTERISTIC -- CG (EIA-C0G)
RATINGS & PART NUMBER REFERENCE
CAP. pF KEMET PART NUMBER MILITARY STYLE CC MILITARY STYLE CCR CAP. pF KEMET PART NUMBER MILITARY STYLE CC MILITARY STYLE CCR
200 VOLT -- C052/C056 SIZE (CC(R)05 PER MIL-PRF-20/35) 1.0 C05(6)G109(2)2G5C(1) CC05CX1R0(2) CCR05CX1R0(2)(1)(7) 1.1 C05(6)G119(2)2G5C(1) CC05CX1R1(2) CCR05CX1R1(2)(1)(7) 1.2 C05(6)G129(2)2G5C(1) CC05CX1R2(2) CCR05CX1R2(2)(1)(7) 1.3 C05(6)G139(2)2G5C(1) CC05CX1R3(2) CCR05CX1R3(2)(1)(7) 1.5 C05(6)G159(2)2G5C(1) CC05CX1R5(2) CCR05CX1R5(2)(1)(7) 1.6 C05(6)G169(2)2G5C(1) CC05CX1R6(2) CCR05CX1R6(2)(1)(7) 1.8 C05(6)G189(2)2G5C(1) CC05CX1R8(2) CCR05CX1R8(2)(1)(7) 2.0 C05(6)G209(2)2G5C(1) CC05CX2R0(2) CCR05CX2R0(2)(1)(7) 2.2 C05(6)G229(2)2G5C(1) CC05CK2R2(2) CCR05CK2R2(2)(1)(7) 2.4 C05(6)G249(2)2G5C(1) CC05CK2R4(2) CCR05CK2R4(2)(1)(7) 2.7 C05(6)G279(3)2G5C(1) CC05CK2R7(3) CCR05CK2R7(3)(1)(7) 3.0 C05(6)G309(3)2G5C(1) CC05CK3R0(3) CCR05CK3R0(3)(1)(7) 3.3 C05(6)G339(3)2G5C(1) CC05CK3R3(3) CCR05CK3R3(3)(1)(7) 3.6 C05(6)G369(3)2G5C(1) CC05CK3R6(3) CCR05CK3R6(3)(1)(7) 3.9 C05(6)G399(3)2G5C(1) CC05CK3R9(3) CCR05CK3R9(3)(1)(7) 4.3 C05(6)G439(3)2G5C(1) CC05CJ4R3(3) CCR05CJ4R3(3)(1)(7) 4.7 C05(6)G479(3)2G5C(1) CC05CJ4R7(3) CCR05CJ4R7(3)(1)(7) 5.1 C05(6)G519(3)2G5C(1) CC05CJ5R1(3) CCR05CJ5R1(3)(1)(7) 5.6 C05(6)G569(3)2G5C(1) CC05CJ5R6(3) CCR05CJ5R6(3)(1)(7) 6.2 C05(6)G629(3)2G5C(1) CC05CJ6R2(3) CCR05CJ6R2(3)(1)(7) 6.8 C05(6)G689(3)2G5C(1) CC05CJ6R8(3) CCR05CJ6R8(3)(1)(7) 7.5 C05(6)G759(3)2G5C(1) CC05CJ7R5(3) CCR05CJ7R5(3)(1)(7) 8.2 C05(6)G829(3)2G5C(1) CC05CH8R2(3) CCR05CH8R2(3)(1)(7) 9.1 C05(6)G919(3)2G5C(1) CC05CH9R1(3) CCR05CH9R1(3)(1)(7) 10.0 C05(6)G100(4)2G5C(1) CC05CH100(4) CCR05CH100(4)(1)(7) 11.0 C05(6)G110(4)2G5C(1) CC05CH110(4) CCR05CH110(4)(1)(7) 12.0 C05(6)G120(4)2G5C(1) CC05CH120(4) CCR05CH120(4)(1)(7) 13.0 C05(6)G130(4)2G5C(1) CC05CH130(4) CCR05CH130(4)(1)(7) 15.0 C05(6)G150(4)2G5C(1) CC05CH150(4) CCR05CH150(4)(1)(7) 16.0 C05(6)G160(4)2G5C(1) CC05CH160(4) CCR05CH160(4)(1)(7) 18.0 C05(6)G180(4)2G5C(1) CC05CH180(4) CCR05CH180(4)(1)(7) 20.0 C05(6)G200(4)2G5C(1) CC05CG200(4) CCR05CG200(4)(1)(7) 22.0 C05(6)G220(4)2G5C(1) CC05CG220(4) CCR05CG220(4)(1)(7) 24.0 C05(6)G240(4)2G5C(1) CC05CG240(4) CCR05CG240(4)(1)(7) 27.0 C05(6)G270(4)2G5C(1) CC05CG270(4) CCR05CG270(4)(1)(7) 30.0 C05(6)G300(4)2G5C(1) CC05CG300(4) CCR05CG300(4)(1)(7) 33.0 C05(6)G330(4)2G5C(1) CC05CG330(4) CCR05CG330(4)(1)(7) 36.0 C05(6)G360(4)2G5C(1) CC05CG360(4) CCR05CG360(4)(1)(7) 39.0 C05(6)G390(4)2G5C(1) CC05CG390(4) CCR05CG390(4)(1)(7) 43.0 C05(6)G430(4)2G5C(1) CC05CG430(4) CCR05CG430(4)(1)(7) 47.0 C05(6)G470(4)2G5C(1) CC05CG470(4) CCR05CG470(4)(1)(7) 51.0 C05(6)G510(4)2G5C(1) CC05CG510(4) CCR05CG510(4)(1)(7)
To complete Part Number, insert the following letters: (1) Available Failure Rates: A (CC styles only); M, P, R & S (CCR styles only). (2) Available Capacitance Tolerances: B, C. (3) Available Capacitance Tolerances: B, C, D. (4) Available Capacitance Tolerances: F, G, J. (5) Available Capacitance Tolerances: F, G, J, K. (6) Insert "2" for standard design, Style C052G Stand-offs are available Insert "6" for stand-off design, Style C056G only as CCR's, not available as CC. (7) Add "V" for stand-off design, Style C056G And leave blank for the flat bottom design (C052G)
200 VOLT -- C052/C056 SIZE (CC(R)05 PER MIL-PRF-20/35) 56.0 C05(6)G560(4)2G5C(1) CC05CG560(4) CCR05CG560(4)(1)(7) 62.0 C05(6)G620(4)2G5C(1) CC05CG620(4) CCR05CG620(4)(1)(7) 68.0 C05(6)G680(4)2G5C(1) CC05CG680(4) CCR05CG680(4)(1)(7) 75.0 C05(6)G750(4)2G5C(1) CC05CG750(4) CCR05CG750(4)(1)(7) 82.0 C05(6)G820(4)2G5C(1) CC05CG820(4) CCR75CG820(4)(1)(7) 91.0 C05(6)G910(4)2G5C(1) CC05CG910(4) CCR05CG910(4)(1)(7) 100.0 C05(6)G101(4)2G5C(1) CC05CG101(4) CCR05CG101(4)(1)(7) 110.0 C05(6)G111(4)2G5C(1) CC05CG111(4) CCR05CG111(4)(1)(7) 120.0 C05(6)G121(4)2G5C(1) CC05CG121(4) CCR05CG121(4)(1)(7) 130.0 C05(6)G131(4)2G5C(1) CC05CG131(4) CCR05CG131(4)(1)(7) 150.0 C05(6)G151(4)2G5C(1) CC05CG151(4) CCR05CG151(4)(1)(7) 160.0 C05(6)G161(4)2G5C(1) CC05CG161(4) CCR05CG161(4)(1)(7) 180.0 C05(6)G181(4)2G5C(1) CC05CG181(4) CCR05CG181(4)(1)(7) 200.0 C05(6)G201(4)2G5C(1) CC05CG201(4) CCR05CG201(4)(1)(7) 220.0 C05(6)G221(4)2G5C(1) CC05CG221(4) CCR05CG221(4)(1)(7) 240.0 C05(6)G241(4)2G5C(1) CC05CG241(4) CCR05CG241(4)(1)(7) 270.0 C05(6)G271(4)2G5C(1) CC05CG271(4) CCR05CG271(4)(1)(7) 300.0 C05(6)G301(4)2G5C(1) CC05CG301(4) CCR05CG301(4)(1)(7) 330.0 C05(6)G331(4)2G5C(1) CC05CG331(4) CCR05CG331(4)(1)(7) 100 VOLT -- C052/C056 SIZE (CC(R)05 PER MIL-PRF-20/35) 360.0 C05(6)G361(4)1G5C(1) CC05CG361(4) CCR05CG361(4)(1)(7) 390.0 C05(6)G391(4)1G5C(1) CC05CG391(4) CCR05CG391(4)(1)(7) 430.0 C05(6)G431(4)1G5C(1) CC05CG431(4) CCR05CG431(4)(1)(7) 470.0 C05(6)G471(4)1G5C(1) CC05CG471(4) CCR05CG471(4)(1)(7) 510.0 C05(6)G511(4)1G5C(1) CC05CG511(4) CCR05CG511(4)(1)(7) 560.0 C05(6)G561(4)1G5C(1) CC05CG561(4) CCR05CG561(4)(1)(7) 620.0 C05(6)G621(4)1G5C(1) CC05CG621(4) CCR05CG621(4)(1)(7) 680.0 C05(6)G681(4)1G5C(1) CC05CG681(4) CCR05CG681(4)(1)(7) 750.0 C05(6)G751(4)1G5C(1) CC05CG751(4) CCR05CG751(4)(1)(7) 820.0 C05(6)G821(4)1G5C(1) CC05CG821(4) CCR05CG821(4)(1)(7) 910.0 C05(6)G911(4)1G5C(1) CC05CG911(4) CCR05CG911(4)(1)(7) 1,000.0 C05(6)G102(4)1G5C(1) CC05CG102(4) CCR05CG102(4)(1)(7) 1,100.0 C05(6)G112(4)1G5C(1) CC05CG112(4) CCR05CG112(4)(1)(7) 1,200.0 C05(6)G122(4)1G5C(1) CC05CG122(4) CCR05CG122(4)(1)(7) 1,300.0 C05(6)G132(4)1G5C(1) CC05CG132(4) CCR05CG132(4)(1)(7) 1,500.0 C05(6)G152(4)1G5C(1) CC05CG152(4) CCR05CG152(4)(1)(7) 1,600.0 C05(6)G162(4)1G5C(1) CC05CG162(4) CCR05CG162(4)(1)(7) 1,800.0 C05(6)G182(4)1G5C(1) CC05CG182(4) CCR05CG182(4)(1)(7) 50 VOLT -- C052/C056 SIZE (CC(R)05 PER MIL-PRF-20/35) 2,000.0 C05(6)G202(4)5G5C(1) CC05CG202(4) CCR05CG202(4)(1)(7) 2,200.0 C05(6)G222(4)5G5C(1) CC05CG222(4) CCR05CG222(4)(1)(7) 2,400.0 C05(6)G242(4)5G5C(1) CC05CG242(4) CCR05CG242(4)(1)(7) 2,700.0 C05(6)G272(4)5G5C(1) CC05CG272(4) CCR05CG272(4)(1)(7) 3,000.0 C05(6)G302(4)5G5C(1) CC05CG302(4) CCR05CG302(4)(1)(7) 3,300.0 C05(6)G332(4)5G5C(1) CC05CG332(4) CCR05CG332(4)(1)(7)
}
(c) KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
31
MIL-PRF-20
CERAMIC MOLDED/RADIAL -- MIL-PRF-20
ULTRA-STABLE TEMPERATURE CHARACTERISTIC -- CG (EIA-C0G) RATINGS & PART NUMBER REFERENCE
CAP. pF KEMET PART NUMBER MILITARY STYLE CC MILITARY STYLE CCR CAP. pF KEMET PART NUMBER MILITARY STYLE CC MILITARY STYLE CCR
200 VOLT -- C062/C066 SIZE (CC(R)06 PER MIL-PRF-20/36) 360.0 C06(6)G361(4)2G5C(1) CC06CG361(4) CCR06CG361(4)(1)(7) 390.0 C06(6)G391(4)2G5C(1) CC06CG391(4) CCR06CG391(4)(1)(7) 430.0 C06(6)G431(4)2G5C(1) CC06CG431(4) CCR06CG431(4)(1)(7) 470.0 C06(6)G471(4)2G5C(1) CC06CG471(4) CCR06CG471(4)(1)(7) 510.0 C06(6)G511(4)2G5C(1) CC06CG511(4) CCR06CG511(4)(1)(7) 560.0 C06(6)G561(4)2G5C(1) CC06CG561(4) CCR06CG561(4)(1)(7) 620.0 C06(6)G621(4)2G5C(1) CC06CG621(4) CCR06CG621(4)(1)(7) 680.0 C06(6)G681(4)2G5C(1) CC06CG681(4) CCR06CG681(4)(1)(7) 750.0 C06(6)G751(4)2G5C(1) CC06CG751(4) CCR06CG751(4)(1)(7) 820.0 C06(6)G821(4)2G5C(1) CC06CG821(4) CCR06CG821(4)(1)(7) 910.0 C06(6)G911(4)2G5C(1) CC06CG911(4) CCR06CG911(4)(1)(7) 1,000.0 C06(6)G102(4)2G5C(1) CC06CG102(4) CCR06CG102(4)(1)(7) 1,100.0 C06(6)G112(4)2G5C(1) CC06CG112(4) CCR06CG112(4)(1)(7) 1,200.0 C06(6)G122(4)2G5C(1) CC06CG122(4) CCR06CG122(4)(1)(7) 1,300.0 C06(6)G132(4)2G5C(1) CC06CG132(4) CCR06CG132(4)(1)(7) 1,500.0 C06(6)G152(4)2G5C(1) CC06CG152(4) CCR06CG152(4)(1)(7) 1,600.0 C06(6)G162(4)2G5C(1) CC06CG162(4) CCR06CG162(4)(1)(7) 1,800.0 C06(6)G182(4)2G5C(1) CC06CG182(4) CCR06CG182(4)(1)(7) 100 VOLT -- C062/C066 SIZE (CC(R)06 PER MIL-PRF-20/36) 2,000.0 C06(6)G202(4)1G5C(1) CC06CG202(4) CCR06CG202(4)(1)(7) 2,200.0 C06(6)G222(4)1G5C(1) CC06CG222(4) CCR06CG222(4)(1)(7) 2,400.0 C06(6)G242(4)1G5C(1) CC06CG242(4) CCR06CG242(4)(1)(7) 2,700.0 C06(6)G272(4)1G5C(1) CC06CG272(4) CCR06CG272(4)(1)(7) 3,000.0 C06(6)G302(4)1G5C(1) CC06CG302(4) CCR06CG302(4)(1)(7) 3,300.0 C06(6)G332(4)1G5C(1) CC06CG332(4) CCR06CG332(4)(1)(7) 3,600.0 C06(6)G362(4)1G5C(1) CC06CG362(4) CCR06CG362(4)(1)(7) 3,900.0 C06(6)G392(4)1G5C(1) CC06CG392(4) CCR06CG392(4)(1)(7) 4,300.0 C06(6)G432(4)1G5C(1) CC06CG432(4) CCR06CG432(4)(1)(7) 4,700.0 C06(6)G472(4)1G5C(1) CC06CG472(4) CCR06CG472(4)(1)(7) 50 VOLT -- C062/C066 SIZE (CC(R)06 PER MIL-PRF-20/36) 5,100.0 C06(6)G512(5)5G5C(1) CC06CG512(5) CCR06CG512(5)(1)(7) 5,600.0 C06(6)G562(5)5G5C(1) CC06CG562(5) CCR06CG562(5)(1)(7) 6,200.0 C06(6)G622(5)5G5C(1) CC06CG622(5) CCR06CG622(5)(1)(7) 6,800.0 C06(6)G682(5)5G5C(1) CC06CG682(5) CCR06CG682(5)(1)(7) 7,500.0 C06(6)G752(5)5G5C(1) CC06CG752(5) CCR06CG752(5)(1)(7)
To complete Part Number, insert the following letters: (1) Available Failure Rates: A (CC styles only); M, P, R & S (CCR styles only). (2) Available Capacitance Tolerances: B, C. (3) Available Capacitance Tolerances: B, C, D. (4) Available Capacitance Tolerances: F, G, J. (5) Available Capacitance Tolerances: F, G, J, K. (6) Insert "2" for standard design, Style C062G Stand-offs are available Insert "6" for stand-off design, Style C066G only as CCR's, not available as CC. (7) Add "V" for stand-off design, Style C066G And leave blank for the flat bottom design (C062G) (8) Available Capacitance Tolerances: G, J, K
50 VOLT -- C062/C066 SIZE (CC(R)06 PER MIL-PRF-20/36) 8,200.0 C06(6)G822(5)5G5C(1) CC06CG822(5) CCR06CG822(5)(1)(7) 9,100.0 C06(6)G912(5)5G5C(1) CC06CG912(5) CCR06CG912(5)(1)(7) 10,000.0 C06(6)G103(5)5G5C(1) CC06CG103(5) CCR06CG103(5)(1)(7) 12,000.0 C06(6)G123(5)5G5C(1) CC06CG123(5) CCR06CG123(5)(1)(7) 15,000.0 C06(6)G153(5)5G5C(1) CC06CG153(5) CCR06CG153(5)(1)(7) 18,000.0 C06(6)G183(5)5G5C(1) CC06CG183(5) CCR06CG183(5)(1)(7) 200 VOLT -- C512 SIZE (CC(R)07 PER MIL-PRF-20/37) 2,200.0 C512G222(5)2G5C(1) CC07CG222(5) CCR07CG222(5)(1) 2,700.0 C512G272(5)2G5C(1) CC07CG272(5) CCR07CG272(5)(1) 3,300.0 C512G332(5)2G5C(1) CC07CG332(5) CCR07CG332(5)(1) 3,900.0 C512G392(5)2G5C(1) CC07CG392(5) CCR07CG392(5)(1) 4,700.0 C512G472(5)2G5C(1) CC07CG472(5) CCR07CG472(5)(1) 100 VOLT -- C512 SIZE (CC(R)07 PER MIL-PRF-20/37) 5,600.0 C512G562(5)1G5C(1) CC07CG562(5) CCR07CG562(5)(1) 6,800.0 C512G682(5)1G5C(1) CC07CG682(5) CCR07CG682(5)(1) 8,200.0 C512G822(5)1G5C(1) CC07CG822(5) CCR07CG822(5)(1) 10,000.0 C512G103(5)1G5C(1) CC07CG103(5) CCR07CG103(5)(1) 12,000.0 C512G123(5)1G5C(1) CC07CG123(5) CCR07CG123(5)(1) 50 VOLT -- C512 SIZE (CC(R)07 PER MIL-PRF-20/37) 15,000.0 C512G153(5)5G5C(1) CC07CG153(5) CCR07CG153(5)(1) 18,000.0 C512G183(5)5G5C(1) CC07CG183(5) CCR07CG183(5)(1) 22,000.0 C512G223(5)5G5C(1) CC07CG223(5) CCR07CG223(5)(1) 27,000.0 C512G273(5)5G5C(1) CC07CG273(5) CCR07CG273(5)(1) 33,000.0 C512G333(5)5G5C(1) CC07CG333(5) CCR07CG333(5)(1) 39,000.0 C512G393(5)5G5C(1) CC07CG393(5) CCR07CG393(5)(1) 47,000.0 C512G473(5)5G5C(1) CC07CG473(5) CCR07CG473(5)(1) 56,000.0 C512G563(5)5G5C(1) CC07CG563(5) CCR07CG563(5)(1) 68,000.0 C512G683(5)5G5C(1) CC07CG683(5) CCR07CG683(5)(1) 83,000.0 C512G823(5)5G5C(1) CC07CG823(5) CCR07CG823(5)(1) 100,000.0 C512G104(5)5G5C(1) CC07CG104(5) CCR07CG104(5)(1) 200 VOLT -- C522 SIZE (CC(R)08 PER MIL-PRF-20/38) 3,900.0 C522G392(8)2G5C(1) CC08CG392(8) CCR08CG392(8)(1) 4,700.0 C522G472(8)2G5C(1) CC08CG472(8) CCR08CG472(8)(1) 100 VOLT -- C522 SIZE (CC(R)08 PER MIL-PRF-20/38) 15,000.0 C522G153(8)1G5C(1) CC08CG153(8) CCR08CG153(8)(1) 18,000.0 C522G183(8)1G5C(1) CC08CG183(8) CCR08CG183(8)(1) 50 VOLT -- C522 SIZE (CC(R)08 PER MIL-PRF-20/38) 56,000.0 C522G563(8)5G5C(1) CC08CG563(8) CCR08CG563(8)(1) 68,000.0 C522G683(8)5G5C(1) CC08CG683(8) CCR08CG683(8)(1)
}
32
(c) KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC LEADED
PACKAGING INFORMATION
Ceramic Axial
Lead Tape and Reel Packaging
Figure 1
KEMET offers standard reeling of Molded and Conformally Coated Axial Leaded Ceramic Capacitors for automatic insertion or lead forming machines per EIA specification RS-296. KEMET'S internal specification four-digit suffix, 7200, is placed at the end of the part number to designate tape and reel packaging, ie: C410C104Z5U5CA7200. Paper (50 lb.) test minimum is inserted between the layers of capacitors wound on reels for component pitch 0.400". Capacitor lead length may extend only a maximum of .0625" (1.59mm) beyond the tapes' edges. Capacitors are centered in a row between the two tapes and will deviate only 0.031 (0.79mm) from the row center. A minimum of 36" (91.5 cm) leader tape is provided at each end of the reel capacitors. Universal splicing clips are used to connect the tape. Standard reel quantities are shown on page 41.
Adhesive Tape
KEMET
(R)
KEMET
(R)
Adhesive Tape
Kraft Paper Interleaving
Figure 2
10.5" - 14" (26.67 35.56cm) .059" to .315" Greater Than Component Length
Figure 3
*
Hub
.047" Max (1.20)
.655" 0.010" (16.6 0.25)
3 1 /4 " (82.6) 1/ " 8 (3.18) See Table 1 (B)
*
See Table 1 (A)
.250" Nom. (6.35)
Table 1
Dimensions in Inches & (Millimeters)
Component Body Diameter Component Pitch "A"
0.020" or (0.5mm)
Inside Tape Spacing "B" 1.5mm (0.059")
I 2.062" (52.4mm) 2.874" (73mm) III*
0" (0mm) to 0.197" (5mm) 0.197" (5.01mm) to 0.394: (10mm)
0.197" or (5mm) 0.394" or (10mm)
* Not Available for Conformally Coated Parts.
(c) KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
39
Tape and Reel Packaging
CERAMIC LEADED
PACKAGING INFORMATION
Ceramic Radial
Lead Tape and Reel Packaging
KEMET offers standard reeling of Molded and Conformally Coated Radial Leaded Ceramic Capacitors for automatic insertion per EIA specification RS-468. Parts are taped to a tagboard carrier strip, and wound on a reel as shown in Figure 1. Kraft paper interleaving is inserted between the layers of capacitors on the reel. Ammopack is also available, with the same lead tape configuration and package quantities.
Figure 1
(R)
Carrier Strip
KEMET
12" (30.48 cm)
*
.059" to .315" Greater Than Over All Height of Taped Components
KEMET
Adhesive Tape
(R)
Hub
.655" 0.010" (16.6 0.25)
31/4" (82.6) 1/ " 8 (3.18)
Carrier Tape
Kraft Paper Interleaving
Figure 3: Standard Reel
C315* C320* C330** C340** C6xx#
C056** C066**
(Note: Non-standard lead lengths available in bulk only.)
CK06** CKR06** C062**
CK05** CKR05** C052**
P
C317** C322** C323**
C6xx# C333**
H
P2
H1 D0
P1
1MM Max. (.039")
H
H0
W2
W0
L1
W Tape
W2
Carrier
F
T
Figure 2: Lead Tape Configuration (See Table Below)
P0
* Lead spacings are 2.54mm (.10") center-to-center. ** Lead spacings are 5.08mm (.20") center-to-center. # See page 15 for exact lead configuration for Series.
Ceramic Radial Tape and Reel Dimensions in Millimeters & (Inches)
Dimension Sprocket Hole Diameter Sprocket Hole Pitch Component Pitch Lead Spacing (1) Sprocket Hole Center to Lead Center (1) Sprocket Hole Center to Component Center Height to Seating Plane (straight leads) (2) Component Height Above Tape Center Symbol Do P0 P F P1 P2 H H1 Nominal mm (inch) 4.0 (.157) 12.7 (.500) 12.7 (.500) 5.08 2.54 (.20) (.10) 3.81 5.08 (.150) (.200) 6.35 (.250) Tolerance mm (inch) 0.2 (.008) 0.3 (.012) 0.3 (.012) +0.6 -0.2 (+.024 -.008) 0.7 (.028) 1.3 (.051) Nominal Tolerance Dimension Symbol mm (inch) mm (inch) H0 Height to Seating 7301 7303 7301 7303 Plane (formed leads) (2) 16.0 (.630) 18.0 (.709) 0.5 (.020) Minimum Component Alignment h 4.0 (.157) 0.2 (.008) Lead Protrusion Composite Tape Thickness Overall Tape and Lead Thickness Carrier Tape Width Hold-Down Tape Width Hold-Down Tape Location L1 t T W W0 W2 1.0 (.039) 0.7 (.051) 1.5 (.059) 18.0 (.709) 5.0 (.197) 3.0 (.118) Maximum 0.2 (.008) Maximum +1.0 - 0.5 (+.039 -.020) Minimum Maximum
7301 7303 7301 7303 16.0 (.630) 18.0 (.709) 0.5 (.020) Minimum 32.2 (1.27) Maximum
(1) Measured at the egress from the carrier tape, on the component side. (2) Determined by a 4 digit suffix placed at the end of the part number, as follows: 7301 = Recommended for parts with formed leads. Example: C322C104K5R5CA7301 7303 = Recommended for parts with straight leads. Example: C320C104K5R5CA7303
40
(c) KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC LEADED
PACKAGING INFORMATION
CERAMIC PACKAGING
KEMET Series C114C-K-G C124C-K-G C192C-K-G C202C-K C222C-K C052C-K-G C062C-K-G C114G C124G C192G C202G C222G C052/56G C062/66G C512G C522G C114T C124T C192T C202T C222T C052/56T C062/66T C31X C32X C33X C340 C350 C410 C412 C420 C430 C440 C512 C522 C617 C622/C623 C627/C628 C630/C631 C637/C638 C640/C641 C642/C643 C647/C648 C657/C658 C667/C668 Military Style CK12, CC75 CK13, CC76 CK14, CC77 CK15 CK16 CK05, CC05 CK06, CC06 CCR75 CCR76 CCR77 CC78-CCR78 CC79-CCR79 CCR05 CCR06 CC07-CCR07 CC08-CCR08 CKR11 CKR12 CKR14 CKR15 CKR16 CKR05 CKR06 Military Specification MIL-C-11015/ MIL-PRF-20 Standard (1) Bulk Quantity 200/Box 200/Box 100/Box 25/Box 10/Tray 100/Bag 100/Bag 200/Box 200/Box 100/Box 25/Box 10/Tray 100/Bag 100/Bag Footnote (2) Footnote (2) 200/Box 200/Box 100/Box 25/Box 10/Tray 100/Bag 100/Bag 500/Bag 500/Bag 250/Bag 100/Bag 50/Bag 300/Box 200/Box 300/Box 200/Box 200/Box Footnote (2) Footnote (2) 500/Bag 500/Bag 500/Bag 250/Bag 250/Bag 100/Bag 100/Bag 100/Bag 50/Bag 50/Bag Ammo Pack Quantity Maximum Maximum Reel Quantity 5000 5000 3000 500 300 2000 1500 5000 5000 3000 500 300 1700 1500 N/A N/A 5000 5000 3000 500 300 1700 1500 2500 2500 1500 1000 N/A 5000 5000 5000 2500 2500 N/A N/A Reel Size 12" 12" 12" 12" 12" 12" 12" 12" 12" 12" 12" 12" 12" 12" N/A N/A 12" 12" 12" 12" 12" 12" 12" 12" 12" 12" 12" N/A 12" 12" 12" 12" 12" N/A N/A
2000 1500
MIL-PRF-20
MIL-PRF-39014
N/A N/A
N/A N/A
NOTE: (1) Standard packaging refers to number of pieces per bag, tray or vial. (2) Quantity varies. For further details, please consult the factory.
(c) KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
41
Tape and Reel Packaging
2500 2500 1500 1000 N/A 4000 4000 4000 2000 2000

▲Up To Search▲

Price & Availability of C114G13922G5C1

	To Download C114G13922G5C1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .